Jailbreak Sct Tuner
*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)
This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.
- I updated the software on the tuner, downloaded the newtunes, loaded them up, and followed the directions. Plugged it into my car, turned the key on (yes, the full two clicks), then off like it told me. Then it screamed at me ENHH ENHH!! And told me to find my dealer. Ummm there's no SCT certified tuner within 50 miles of me.
- This FF2 tuner is a compact hand held flash tool that comes pre-programmed with up to 3 tunes (tunes vary by application). It features an easy to read screen for programming navigation and on screen datalogging. Data logging is also possible using pass through data logging to a computer through SCT’s live link software.
- Have an SCT X3 (XP serial numbers only), X4, LiveWire, LiveWire TS+, iTSX or Bully Dog GT (with serial number P, N or S as the 5th digit) device that is married to another vehicle? No matter if the device.
SCT Tuner by Ive been seeing used SCT SF3 tuners on Ebay for about 150 and less. Showing how to hook up a Shop This SCT Power Flash Tuner: amtrucks. 5 folks start asking about that they can unlock and untethered jailbreak iPhone U. Pro Tuner Money Hacked (NO JAILBREAK! If this occurs, the ONLY way to get the tuner unlocked is to send it into SCT and its $75 for us to unlock it. This can cause you to be stuck on a. They build what people call 'tuners', or Strategy Flash Devices, or programmers, or a buncha other names. Unlocked SCT SF3 #3015 tuner/programmAug 10, 2011.
Device Updater
OS Requirements: Windows Vista/7/8/10
*Used to download updates for GTX, BDX, X4, Livewire, ITSX
Click hereto download the Device Updater.
Make sure all devices are unplugged during the install process.
Livelink Gen-II
OS Requirements: Windows Vista/7/8/10
*Datalogging software.
Click hereto download Livelink Gen-II.
Make sure all devices are unplugged during the install process.
Advantage III
OS Requirements: Windows Vista/7/8/10
Click hereto download Advantage III.
Make sure all devices are unplugged during the install process.
Drivers
Windows 32bit drivers click here.
Windows 64bit drivers click here.
Install Instructions
If you installed the SCT device updater before you plugged the device in then this should be easy to fix.
With your device connected:
Open your computers Device Manager.
Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)
Diablo Tuner
If you see this, right click it and select update driver.
Sct X4 Tuner
A new window should open up and give you the option to either automatically search, or browse for files.
Click browse for files
Navigate to the folder you downloaded, and select “Open”.
If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.
Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.
Update Agent for GT's
How do I update my Bully Dog GT Tuner?
Basic Steps to Update a GT Tuner
1. Run the Update Agent.
2. Connect the Micro SD card to your computer.
3. Choose the vehicle application and let the Agent search.
4. Click the Update button.
5. When the Update is finished, put the Micro SD card in the GT.
6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)
Detailed Steps to Update a GT Tuner
Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?
To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.
- Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
- Connect the SD with either the card reader or the GT itself and the USB cable
- Highlight the card in the update agent, and select “select device”
4. Select your device (40417, 40420, etc.) then select “download and upgrade”
5. Wait for the download to finish, you will see this message.
6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.
How do I update my Bully Dog GT Tuner?
Basic Steps to Update a GT Tuner
1. Run the Update Agent.
2. Connect the Micro SD card to your computer.
3. Choose the vehicle application and let the Agent search.
4. Click the Update button.
5. When the Update is finished, put the Micro SD card in the GT.
6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)
Detailed Steps to Update a GT Tuner
Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?
To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.
- Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
- Connect the SD with either the card reader or the GT itself and the USB cable
- Highlight the card in the update agent, and select “select device”
4. Select your device (40417, 40420, etc.) then select “download and upgrade”
5. Wait for the download to finish, you will see this message.
6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.
An unlock should only be purchased when:
- Your device is either married/installed on a vehicle that you are no longer able to return back to stock due to not having the vehicle anymore.
- You bought a used tuner that was locked.
- Your device is out of the five-vehicle unlocks.
Remotely unlocking your device does not add any additional features to your X4.
This is only available for the X4 for Ford, part number 7015.
- Click Here to purchase the unlock.
- Enter your devices serial number into the serial number field and click 'Look Up Device.'
- Click 'Continue' on the Device Found page.
- Enter your payment information select 'Complete Purchase.'
You will receive an email with the order/confirmation number. At this point, you are ready to unlock your device.
Note: This transaction is non-refundable.
To send the unlock to your device follow the steps below.
- Open the Device Updater on your Windows computer.
- Plug the device in and then click on 'Automatically Check for Updates.' This option will appear on your PC, not the device itself.
- Once the update has finished your device is unlocked and ready to be used again.
- NOTE: The unlock must be done using a Windows PC. You may not use wifi to unlock the X4.
*This service is not available in the state of California.*